61200780L1-1C © 2004 ADTRAN, Inc. 101ATLAS 800 Series System Manual System Utility Menu DescriptionsForce Controller Switch (ATLAS 890)Force Controller Switch (ATLAS 890)Write security: 0; Read security: 0Forces the switch from active to standby to occur immediately.Reboot SystemWrite security: 0; Read security: 0Reboots the ATLAS 800 Series system. When you select this command, the following message displays:** WARNING ** This will reboot the entire system and service will be interrupted!Press Y to reboot the system or N to cancel the command.Factory Default SystemWrite security: 0; Read security: 0Resets the entire system to the factory default settings. To reset the system, press Y. To cancel thiscommand, press N. When you select this command, the following message displays:Alarm Relay Test (ATLAS 890)Write security: 5; Read security: 5TOGGLE TEST M ODE / TOGGLE set the amount of time for which the alarm relay test mode is active. Changethe amount of time by placing the cursor over the TOGGLE field and pressing the “.” key to increases theamount of test time and the “,” key to decreases the amount of test time. The displayed time is in seconds.This will delete all configuration settings. ADTRAN recommends making a backupcopy of the configuration before defaulting the system.
