61200780L1-1C © 2004 ADTRAN, Inc. 372ATLAS 800 Series System Manual VT100 UtilityADTRAN Utilities Session Menu2. VT100 UTILITYUse the VT100 to configure an ATLAS 800 Series which is directly connected to a PC. The VT100 displayis almost identical to the Telnet display. For a detailed description of how to work within the terminalmenu, refer to Navigating the Terminal Menus in the User Interface Guide section of this manual. If youneed help setting up the ATLAS 800 Series for a VT100 session, refer to the Detailed Level Proceduressection of this manual. VT100 menus include SESSION, EDIT, P ORT, OPTIONS, CAPTURE, and H ELP (seethe menu tree in Figure 2).Figure 2. VT100 Menu TreeSession MenuOpens VT100 terminal emulation session.Connect Opens a specified serial port for a VT100 session.Disconnect Closes a specified serial port at the end of a VT100 session.File Transfer Uploads and downloads files to and from an ATLAS 800 Series.ConnectSession DisconnectFile Transfer XMODEM CRCExit ASCII Cfg Files Send Cfg FileEdit CopyPastePort SettingsRefresh Screen Transmit WakeupConnect Transmit RefreshVT100 Options ColorsLocal Echo BackGroundAuto Repeat BoldTextFile Start Cfg CaptureCapture Buffer Size Stop Cfg CaptureSave Buffer AsScreen CaptureHelp ContentsAboutSubmenu DescriptionXMODEM CRC Selects the XMODEM file transfer protocol.ASCII Cfg Files Selects ASCII transfer mode. Primarily useful for configuration transfers for theADTRAN products.
