61200780L1-1C © 2004 ADTRAN, Inc. 581. INTRODUCTIONThis section discusses the installation process for the ATLAS 800 Series System.2. TOOLS REQUIREDThe tools required for installation of the ATLAS include the following:• #2 Phillips-head screwdriver• Flat-head screwdriver (for installing modules)3. UNPACKING AND INSPECTING THE SYSTEMEach ATLAS is shipped in its own cardboard shipping carton. Open the carton carefully and avoid deeppenetration into the carton with sharp objects. After unpacking the unit, inspect it for possible shippingdamage. If the equipment has been damaged in transit, immediately file a claim with the carrier, thencontact ADTRAN Customer Service (see the contact information in the front of this manual).Contents of ADTRAN ShipmentTable 1 lists the items included in your ADTRAN shipment. Customers must supply a DB-9 male consolecable for VT100 terminal/terminal emulation connection and an Ethernet cable.To prevent electrical shock, do not install equipment in a wet location or during a lightningstorm.Electronic modules can be damaged by static electrical discharge. Before handling modules, wearan antistatic discharge wrist strap to prevent damage to electronic components. Place modules inantistatic packing material when transporting or storing. When working on modules, always placethem on an approved antistatic mat that is electrically grounded.Table 1. Items Included in ATLAS ShipmentItem Description ATLAS 830 ATLAS 890Either the ATLAS 830 or the ATLAS 890 base unit One Base UnitThe ATLAS System CD D DAC Power cord - ADTRAN P/N 3127031 (with AC systems) D D19” Rackmount brackets and screws D n/a
