|
MX2800 M13 Multiplexer User Manual Transaction Language 1 (TL1), Section 961200290L1-1G 9-175. TL1 ERROR CODESWhen the MX2800 denies a received TL1 command, the Output Response message has an associated fourletter error code indicating the reason for denial. Table 9-5 lists possible error codes.TL1 EditingTL1 editing commands allow the MX2800 to be provisioned through a TL1 session rather than through themenu system that is accessed using a VT100 terminal emulator. User account information must be provi-sioned through a console menu session or TL1 session prior to initiating a TL1 session. Once a TL1session has been initiated using the ACT-USER command, see Table 9-2 on page 9-6, the TL1 editingcommands may be used. The standard format for an edit command is as follows:ED-rr::::::=;The parameter descriptions are as follows:• rr is T1, T2, T3, or EQPT• is the Target Identifier• is the Access Identifier• is a 1-to-6 character correlation tag (echoed in response)• is one of the entries from the data dictionaries in Table 9-6 on page 9-20, Table 9-7 onpage 9-23, Table 9-8 on page 9-24, or Table 9-9 on page 9-27.• is one of the enumerated types in the data dictionaries, an integer, or Y/N, depending on theTYPE.Table 9-5. TL1 Error CodesError Code DescriptionICNV Input, Command Not ValidIDRG Input, Date RangeIIAC Input, Invalid Access IdentifierIITA Input, Invalid Target IdentifierIPNV Input, Parameter Not ValidPIUI Privilege, Input User Not ValidPLNA Privilege, Login Not Active or Insufficient PrivilegesSROF Status, Requested Operation FailedSSRE Status, System Resources Exceeded
|
