Section 6, User Interface - Menu Descriptions61189008L1-1B 6-39View Map MenuThe View Map menu (see Figure 6-24) provides a view of the cross-connect on one screen andallows connection mapping.Figure 6-24. View Map MenuThe View Map menu options are shown in Table 6-17.Table 6-17. View Map Menu OptionsOption Description FunctionA1–A28B1–B28P1–P16MA1–MA4MB1–MB4DS3 A 1–28DS3 B 1–28DS1 Ports 1–16Module A DS1s 1–4Module B DS1s 1–4To make a selection, enter the letter or lettersfollowed directly by the number and then pressENTER.If selection is currently mapped to a T1, theConfirm Unmap/Map screen provides a yes/nooption to unmap the selected cross-connect.If selection is currently unmapped, the “MAP TO DS1:” prompt appears at thebottom of the menu allowing another selection tobe made to complete the connection. If thesecond selection is currently mapped to a T1, theConfirm Unmap/Map screen provides a yes/nooption to unmap the current cross-connect andmap the newly selected cross-connect.Card: Controller A ADTRAN MX3216 System MM/DD/YY hh:mmUnacknowledged Alarms: NONE ID: Site 1 MX3216MX3216->Provisioning->Cross-Connect->View MapT DS3 DS3 DS1 MODULE MODULE T DS3 DS31 A(A) B(B) PORTS(P) A (MA) B (MB) 1 A(A) B(B)1 B1 A1 - - - 17 B17 A172 B2 A2 - - - 18 B18 A183 B3 A3 - - - 19 B19 A194 B4 A4 - - - 20 B20 A205 B5 A5 - 21 B21 A216 B6 A6 - 22 B22 A227 B7 A7 - 23 B23 A238 B8 A8 - 24 B24 A249 B9 A9 - 25 B25 A2510 B10 A10 - 26 B26 A2611 B11 A11 - 27 B27 A2712 B12 A12 - 28 B28 A2813 B13 A13 - To Make/Break a Connection enter the14 B14 A14 - DS1 (Example: A28 for DS3 A T1 #28)15 B15 A15 -16 B16 A16 - '?' - System Help ScreenSELECT DS1:
