Section 6, User Interface - Menu Descriptions61189008L1-1B 6-35Cross-Connect MenuThe Cross-Connect menu (see Figure 6-21) allows provisioning of the 3-to-1 cross-connect.The Cross-Connect menu displays the cross-connect assignment, if any, for each tributaryDS1.Establish connections between the DS3s, rear panel DSX-1 drops, and module card DS1s asshown in Figure 3-1 on page 3-2. With some restrictions, any DS1 can be connected to anyother DS1. The restrictions are as follows:• DS1s in the same DS3 cannot be connected.• DS1 ports cannot be connected to other DS1 ports (DSX-1 drops).• DS1s on the same module cannot be connected.• No more than two DS1 ports (DSX-1 drops) can be connected to module DS1s.• All connections are two-way only. Only two DS1s can be part of any given connection. Athird DS1 cannot be added to a connection.Refer to “Cross-Connect Methods” on page 5-5 for provisioning details.Figure 6-21. Cross-Connect MenuThe Cross-Connect menu options are shown in Table 6-13.Table 6-13. Cross-Connect Menu OptionsOption Description Function1–28 DS3 A T1 1–28 If currently mapped, this option displays theConfirm Unmap/Map screen that provides a yes/nooption to unmap the selected cross connect.If currently unmapped, this option displays the“Cross-Connect Change Menu” on page 6-38.Card: Controller A ADTRAN MX3216 System MM/DD/YY hh:mmUnacknowledged Alarms: NONE ID: Site 1 MX3216MX3216->Provisioning->Cross-ConnectDS3 A1 - T1 #1 = DS3 B T1 #1 15 - T1 #15 = DS3 B T1 #152 - T1 #2 = DS3 B T1 #2 16 - T1 #16 = DS3 B T1 #163 - T1 #3 = DS3 B T1 #3 17 - T1 #17 = DS3 B T1 #174 - T1 #4 = DS3 B T1 #4 18 - T1 #18 = DS3 B T1 #185 - T1 #5 = DS3 B T1 #5 19 - T1 #19 = DS3 B T1 #196 - T1 #6 = DS3 B T1 #6 20 - T1 #20 = DS3 B T1 #207 - T1 #7 = DS3 B T1 #7 21 - T1 #21 = DS3 B T1 #218 - T1 #8 = DS3 B T1 #8 22 - T1 #22 = DS3 B T1 #229 - T1 #9 = DS3 B T1 #9 23 - T1 #23 = DS3 B T1 #2310 - T1 #10 = DS3 B T1 #10 24 - T1 #24 = DS3 B T1 #2411 - T1 #11 = DS3 B T1 #11 25 - T1 #25 = DS3 B T1 #2512 - T1 #12 = DS3 B T1 #12 26 - T1 #26 = DS3 B T1 #2613 - T1 #13 = DS3 B T1 #13 27 - T1 #27 = DS3 B T1 #2714 - T1 #14 = DS3 B T1 #14 28 - T1 #28 = DS3 B T1 #28(T)oggle View (DS3 B, Drops) (V)iew MapSelection : '?' - System Help Screen
