MX3216 System Manual6-28 61189008L1-1BEquipment Identification MenuThe Equipment Identification menu (see Figure 6-16) is used to enter ID codes for the nearand far end facility, location, frame, unit, and equipment. These fields provide user-config-urable text strings to identify the MX3216 system over the network.Figure 6-16. Equipment Identification MenuThe Equipment Identification menu options are shown in Table 6-8.Table 6-8. Equipment Identification Menu OptionsOption Description Function1 Near End Facility ID Code This option is used to enter a near end facility IDcode. When using C-bit framing, this is transmittedin the DS3 overhead to the next device. The code isa user-configurable text string. This field accepts upto 38 alphanumeric characters, including spacesand special characters.2 Near End Location ID Code This option is used to enter a near end location IDcode. When using C-bit framing, this is transmittedin the DS3 overhead to the next device. The code isa user-configurable text string. This field accepts upto 11 alphanumeric characters, including spacesand special characters.Card: Controller A ADTRAN MX3216 System MM/DD/YY hh:mmUnacknowledged Alarms: NONE ID: Site 1 MX3216MX3216->Provisioning->DS3->A Equipment Identification1 - Near End Facility ID Code : N/A2 - Near End Location ID Code : N/A3 - Near End Frame ID Code : N/A4 - Near End Unit Code : N/A5 - Near End Equipment Code : N/AFar End Facility ID Code : N/AFar End Location ID Code : N/AFar End Frame ID Code : N/AFar End Unit Code : N/AFar End Equipment Code : N/A6 - Copy Near End data from DS3 B Near End DataSelection : '?' - System Help Screen
