Logging in to the MX410/MX412 MX410/MX412 System Manual5-2 PRELIMINARY 61189500L1-1Bñ no parity (none)ñ one stop bitñ no flow control2. Set the PC for direct connect on the appropriate communications port (as opposed to dialup connection).3. Plug the male end of the data cable into the MX410/MX412. Make connection to the PC orlaptop as appropriate for the equipment.Telnet SessionTo access the MX410/MX412, use an appropriate Telnet client to access the managementinterface of the MX410/MX412 at the configured IP address.LOGGING IN TO THE MX410/MX412To logon to the MX410/MX412, perform the following steps:1. Establish the physical connection to the MX410/MX412 using a craft port session orenter the default IP address ì192.168.100.1î with a subnet mask of ì255.255.0.0.î toestablish a Telnet session.2. Enter the default username ìADMINî in all capital letters, and press E NTER.3. Enter the default password ìPASSWORDî in all capital letters, and press E NTER.NOTELogin username and password fields are case sensitive. The defaultvalues are all uppercase.
