Menu Descriptions MX410/MX412 System Manual5-40 PRELIMINARY 61189500L1-1BStatus ScreenThe Status screen (see Figure 5-25) provides detailed status information about the DS1 Ports,Ethernet Ports, PPP, Timing, and the Power Feed.Figure 5-25. Status ScreenThe Status menu options are shown in Table 5-21.Table 5-21. Status Screen FieldsOption Description FunctionDS1 Ports1-4 State This field displays the current state of the four DS1 Ports as eitherEnabled or Disabled.Line Status This field displays the current line status of the four DS1 ports (12 portson the MX412). The possible states are as follows:ï LOS: Loss of Signalï LOF: Loss of Frame (RX Red Alarm)ï RX AIS: Receiving Alarm Indication Signal (RX Blue Alarm)ï TX AIS: Transmitting Alarm Indication Signal (TX Blue Alarm)ï RX RAI: Receiving Remote Alarm Indicator (RX Yellow Alarm)ï TX RAI: Transmitting Remote Alarm Indicator (TX Yellow Alarm)ï Normal: Indicates no alarms currently activeMX410 MM/DD/YY HH:MMActive Alarms: CRITICAL MAJOR ID: MX410StatusDS1 Ports PPP InterfacesState Line Status Test State LCP BCP IPCP1 - Enabled LOS,TX RAI Data mode 1 - Disabled DOWN DOWN DOWN2 - Enabled LOS,TX RAI Data mode 2 - Enabled DOWN DOWN DOWN3 - Enabled LOS,TX RAI Data mode 3 - Disabled DOWN DOWN DOWN4 - Enabled LOS,TX RAI Data mode 4 - Disabled DOWN DOWN DOWNEthernet Ports Auxiliary AlarmsStatus Speed Status Severity1 - Up 100 Mbps, Full Duplex 1 - Cleared N/A2 - Up 100 Mbps, Full Duplex 2 - Cleared N/A3 - Down Unknown 3 - Cleared N/A4 - Down Unknown 4 - Cleared N/APower Feed PSU Timing SourceStatus State Status Status SourceA - Normal A - Installed Normal Primary - Normal InternalB - Normal B - Installed Normal Secondary - Normal Internal'?' - System Help Screen
