612806320L1-1B Copyright © 2005 ADTRAN, Inc. 101DLP-5 Updating the Firmware Using TFTPIntroductionThe TRACER 6000 Series split system supports firmware updates using TFTP or XMODEM. Use theTRACER 6200 10/100BaseT/TX MGMT Ethernet port and TFTP from a network server or XMODEM (ifyour Telnet client supports file transfers), or use XMODEM and the CRAFT interface. This DLP providesthe steps for a successful firmware upgrade using the 10/100 BaseT/TX MGMT Ethernet port and a TFTPserver. (See DLP-6, Updating the Firmware Using XMODEM, on page 105 for instructions on usingXMODEM.)Tools and Materials Required• A PC with Telnet client software• A TFTP server accessible on the networkTo prevent electrical shock, do not install equipment in a wet location or during alightning storm.Electronic equipment can be damaged by static electrical discharge. Before handling it,put on an antistatic discharge wrist strap to prevent damage to electronic components.Place equipment in antistatic packing material when transporting or storing. Whenworking on equipment, always place it on an approved antistatic mat that is electricallygrounded.
