Section 8 Troubleshooting Guide TRACER 6000 Series Split System Manual126 Copyright © 2005 ADTRAN, Inc. 612806320L1-1BInstalling/Configuring E1 Hardware1. If possible, attach any or all of the intended E1 hardware to the TRACER units using the sameworkbench setup. This step offers the perfect opportunity to configure your E1 hardware forproper functioning with the TRACER hardware.2. To significantly reduce the probability of an unsuccessful field installation, resolve any remainingE1 equipment-to-TRACER configuration issues before field installation. See E1 Interface Alarmson page 122 for more information on resolving E1 interface alarm conditions.Installing/Configuring Ethernet Hardware1. If possible, attach any or all of the intended Ethernet hardware to the TRACER units using thesame workbench setup. This step offers the perfect opportunity to configure your Ethernethardware for proper functioning with the TRACER hardware.2. To significantly reduce the probability of an unsuccessful field installation, resolve any remainingEthernet equipment-to-TRACER configuration issues before field installation.
