Chapter 8. Telnet/Terminal Menus8-4 TSU 120 User Manual 61202129L1-1Editing the Temp MapTo edit the Temp Map, follow these steps.Applying the Temp MapOnce the Temp map reflects the desired configuration, useSelections 8 or 9 to apply this configuration to Map A or B,respectively.Reviewing MapsSelections 4 through 6 give a summary of the number of portsassigned to Map A, Map B, and the Temp Map, respectively.Step Action1 To make additional changes to the Temp Map, use Selection7 to enter the Temp Map edit mode.Explanation:Upon entering this mode, the cursor location moves to DS0number one in the DS0 field of the Temp Map. The cursormay be moved from one DS0 to another using the ArrowKeys until it is located at the DS0 number whose assignedport needs to be changed.2 Press the Enter Key to move the cursor to the Port field3 Use the Arrow Keys to scroll through the possible portselections.4 Press the Esc Key to restore the previous port assignmentand return to the DS0 field.5 Press the Enter Key to save the current selected port andreturn to the DS0 field.Explanation:Once the cursor is again located in the Temp Map DS0 field,pressing the Esc Key a second time, causes the cursor toreturn to Selection 1 below the Temp Map display.
