Chapter 8. Telnet/Terminal Menus61202129L1-1 TSU 120 User Manual 8-9System LocationA text string describing the physical location of an SNMP man-aged node (for example, SECOND FLOOR PBX ROOM).Auth. Fail Traps Sent(DISABLED, ENABLED: defaults to DISABLED)When enabled, the TSU 120 issues an SNMP trap when anySNMP request is received with an invalid community name.Can be used for security purposes.Poll Link Status Traps Sent(DISABLED, ENABLED, defaults to DISABLED). When enabled,the TSU 120 sends an SNMP trap whenever a device config-ured to be polled fails to respond. When the device beginsresponding to polls, a poll link-up trap is sent. The format ofthe traps are defined in the agent MIB.Ping IP HostAllows the user to Ping a specific IP address.Telnet/Terminal TimeoutThe TSU 120 terminates a TELNET or Terminal session if noactivity is detected for this length of time. Only one TELNET orTerminal session may be active at one time. This timeout pre-vents an unattended session from blocking interactive access tothe agent. The default value is five minutes.Telnet/Terminal PasswordThis option allows modification of the password required forentry into a TELNET or Terminal session. The default value isADTRAN.ExitReturns to the TSU 120 Main menu.
