Chapter 8. Telnet/Terminal Menus8-6 TSU 120 User Manual 61202129L1-1Figure 8-3. Unit Access TableAdd New UnitThis adds a new device to the unit access table.• You must enter a device U NIT ID, PASSCODE, U NIT TYPE, andPOLLED FLAG.• Unit type can be S TANDARD (which supports any TSU/TDUMultiplexer and the ISU 512) or TSU S TANDALONE (a singleport TSU with no option card slot).• You may select a passcode of 0 to 9999 for each device orDEFAULT. This results in the default passcode being used(defined as 0022 in Figure 8-3).• Traps are normally sent from the unit in alarm to the TSU120. For units in the Unit Access Table that are not chaineddirectly to the TSU 120 but are managed over Inband or theFDL, traps are not automatically forwarded.• Polling must be enabled on the TSU 120 for these units in or-der to receive Traps on the NMS. The TSU 120 can be con-figured to poll selected units for traps by enabling thepolled option when adding or modifying a unit entry._____________________________Unit Access ____________________________Unit ID Passcode Type Polled PollStatus20 DEFAULT Standard No3 0033 Standard Yes UP6 0095 TSU Stand Alone No8 0022 Standard Yes UP1) Add New Unit2) Modify Unit3) Delete Unit4) Default Unit Passcode 00225) OK
