45Instruction on setting upInstruction on setting up1 Important! The new appliance may only be installed and connected by qualified personnel.Please observe this instruction, otherwise the warranty will not cover any damage that may occur.Setting up• In the units or furniture surrounding the appliance, veneers or plastic coatingsmust have been made up using heatresistant bonding agents (100°C). If plastic coatings or cements are not sufficiently heatresistant, the coating may bedeformed or loosened.• The appliance may be installed up against tall units or walls on one side only.• The distance between the cooking surface and the cooker hood must as aminimum be as great as that indicated in the installation instructions for thecooker hood.• If the appliance is being placed on a base, measures must be taken to preventthe appliance from sliding off the base.Making the appliance levelUnderneath the appliance there are4 adjustable feet, which can be used toeven out small unlevelnesses in the floor.1. Remove the pan drawer.2. Turn the adjustable feet to make themhigher or lower as required, until the cooker is standing level.3. Reinsert the pan drawer.3 The adjustable feet are easier to turn, if thecooker is tilted slightly to take the weightoff the foot.