AEG 49332I-MN User Manual

Also see for 49332I-MN: User manual User manual

To install panels, do the above steps inthe opposite sequence. Insert thesmaller panel first, and then the largerone.MAIN OVENCLEANING THE DOOR GLASSPANELSThe door glass on your productcan be different in type andshape from the example yousee in the diagram. The numberof glasses can also be different.Removing the glass:12A1. Push the door trim at one side toremove it. Refer to the diagram.2. Pull up the trim.3. Remove the glass panels.To replace the glass panels, dothe above steps in the oppositesequence. Before you lower thetrim, attach the A trim part tothe door. Refer to the diagram.OVEN LAMPWARNING!Be careful when you change theoven lamp. There is a risk ofelectrical shock.Before you change the oven lamp:• Deactivate the oven.• Remove the fuses in the fuse box ordeactivate the circuit breaker.Put a cloth on the bottom of theoven to prevent damage to theoven light and glass cover.Replacing the oven lamp1. You can find the lamp glass coverat the back of the cavity.Turn the lamp glass cover counter-clockwise to remove it.2. Clean the glass cover.3. Replace the oven lamp with an ap-plicable 300°C heat-resistant ovenlamp.Use the same oven lamp type.4. Install the glass cover.38