Stainless steel or aluminium ap-pliances:Clean the oven door with a wetsponge only. Dry it with a softcloth.Do not use steel wool, acids orabrasive materials, as they cancause damage to the oven sur-face. Clean the oven control pan-el with the same precautions.10.1 Shelf supportsYou can remove the shelf supports toclean the side walls.Removing the shelf supports1. Pull the front of the shelf supportaway from the side wall.212. Pull the rear end of the shelf sup-port away from the side wall and re-move it.Installing the shelf supportsInstall the shelf supports in the oppositesequence.The rounded ends of the shelfsupports must point to the front.10.2 PyrolysisWARNING!The appliance becomes very hot.There is a risk of burns.CAUTION!If a hob is installed with the ap-pliance, do not use it at the sametimes as the Pyrolysis function. Itcan cause damage to the appli-ance.1. Remove the removable shelf sup-ports (if applicable) and accessoriesfrom the appliance. Refer to "Re-moving the shelf supports".CAUTION!Do not let the removable shelfsupports stay in the applianceduring the cleaning procedure.There is a risk of damage.2. Remove the worst dirt manually.3. Fully close the oven door.The cleaning procedure cannotstart if you do not close the ovendoor.4. Set the function Pyrolysis. Refer to"Oven functions".5. When flashes, press + or - to setthe necessary procedure:20 www.aeg.com