AEG BP3003021 User Manual

Also see for BP5014301: User manual User manual User manual

Contents

AEG BP3003021 User Manual Manual pdf 4 page image

• Before maintenance cut the power supply.• Do not use harsh abrasive cleaners or sharp metalscrapers to clean the glass door since they canscratch the surface, which may result in shattering ofthe glass.• Excess spillage must be removed before the pyrolyticcleaning. Remove all parts from the oven.• To remove the shelf supports first pull the front of theshelf support and then the rear end away from theside walls. Install the shelf supports in the oppositesequence.• If the supply cord is damaged, it must be replaced bythe manufacturer, an authorized Service or similarlyqualified persons in order to avoid a hazard.• The means for disconnection must be incorporated inthe fixed wiring in accordance with the wiring rules.• Ensure that the appliance is switched off before re-placing the lamp to avoid the possibility of electricshock.2. SAFETY INSTRUCTIONS2.1 InstallationWARNING!Only a qualified person must in-stall this appliance.• Remove all the packaging.• Do not install or use a damaged appli-ance.• Obey the installation instruction sup-plied with the appliance.• Always be careful when you move theappliance because it is heavy. Alwayswear safety gloves.• Do not pull the appliance by the han-dle.• Keep the minimum distance from theother appliances and units.• Make sure that the appliance is instal-led below and adjacent safe struc-tures.• The sides of the appliance must stayadjacent to appliances or to units withthe same height.Electrical connectionWARNING!Risk of fire and electrical shock.• All electrical connections should bemade by a qualified electrician.• The appliance must be earthed.• Make sure that the electrical informa-tion on the rating plate agrees withthe power supply. If not, contact anelectrician.4 www.aeg.com