AEG BP8314001 User Manual

Also see for BP8314001: User manual

6.6 Energy savingThe appliance contains featureswhich help you save energyduring everyday cooking:• Residual heat:– When the heating function or pro-gramme operates, the heating ele-ments are deactivated 10% earlier(the lamp and fan continue to oper-ate). For this feature to operate, thecooking time must be longer than30 minutes or you must use theclock functions ( Duration , EndTime ).– When the appliance is off, you canuse the heat to keep food warm.The display shows the remainingtemperature.• Cooking with the lamp off - touchand hold for 3 seconds to deacti-vate the lamp during cooking.• Eco functions - refer to section "Heat-ing Functions" (for selected modelsonly).7. CLOCK FUNCTIONSSymbol Function DescriptionMinute MinderTo set a countdown (max. 2 h 30 min). This func-tion has no effect on the operation of the appli-ance. You can also activate it when the applianceis deactivated. Use to activate the function.Press or to set the minutes and OK to start.Duration To set how long the appliance has to be in opera-tion (max. 23 h 59 min).End Time To set the switch-off time for a heating function(max. 23 h 59 min).If you set the time for a clock function,the time starts to count down after 5 sec-onds.If you use the clock functions Du-ration and End Time , the appli-ance deactivates the heating ele-ments after 90 % of the set time.The appliance uses the residualheat to continue the cookingprocess until the time ends (3 -20 minutes).Setting the clock functions1. Set a heating function.2. Press again and again until thedisplay shows the necessary clockfunction and the related symbol.3. Press or to set the necessarytime. Press OK to confirm. When thetime ends, an acoustic signalsounds. The appliance deactivates.The display shows a message.4. Press a sensor field to stop the sig-nal.Useful information:• With Duration and End Time you mustset the heating function and the tem-perature first. Then you can set theclock function. The appliance deacti-vates automatically.• You can use Duration and End Time atthe same time, if you want to automat-ically activate and deactivate the ap-pliance on a given time later.• When you use the Core TemperatureSensor (if applicable), the Durationand End Time functions do not work.7.1 Heat + HoldThe Heat + Hold function keeps pre-pared food warm at 80 °C for 30 mi-nutes. It activates after the baking orroasting procedure ends.14 www.aeg.com