The appliance calculates an approximateend time. The end time is different forthe different quantities of the food, theset oven temperatures (minimum 120 °C)and the operating modes. The appliancecalculates the end time in approximately30 minutes.6. To change the core temperature,press .When the meat is at the set coretemperature, an acoustic signal sounds.The appliance deactivates automatically.7. Touch a sensor field to stop thesignal.8. Remove the core temperature sensorplug from the socket and remove themeat from the oven.WARNING!The core temperature sensoris hot. There is a risk ofburns. Be careful when youremove the tip and the plugof the core temperaturesensor.9.2 Inserting the accessoriesCAUTION!Do not use the baking trayor deep pan with thefunction: Full Steam.Wire shelf:Push the shelf between the guide bars ofthe shelf support and make sure that thefeet point down.Deep pan:Push the deep pan between the guidebars of the shelf support.Wire shelf and the deep pan together:Push the deep pan between the guidebars of the shelf support and the wireshelf on the guide bars above.• All accessories have smallindentations at the top ofthe right and left side toincrease safety. Theindentations are also anti-tip devices.• The high rim around theshelf is a device whichprevents cookware fromslipping.www.aeg.com18EURO Appliances - euappliances.info