In certain programmes the spin speed has not effect (time controlled cycles), itsselection can be not selectable and only three dashes are visualized. Available se-lections: from 800 to 1800 rpm's in 100 rpm's intervals.The maximum value depends by selected program, the minimum is always 800 rpmFor those programs where the spin speed has no effect (time controlled cycles), theselection is not allowed and three dashes “- - -” are displayed that has the meaningof not set or unknown.The user interface always remembers last spin selection, and proposes it as defaultfor all new selected programs. If memorized spin speed is greater than maximumallowed value it will be automatically reduced to max spin speed available for theselected program.Selecting TIME (TIJD PROGR.)To select the programme duration after setting the TIME programme. You can selecta programme duration from 10 minutes to 3 hours in 10-minute steps.1. Turn the programme knob to the TIMED PROGRAMME. The 0:10 minutes is inthe display (corresponding to the COOLING programme).2. Press the TIME button repeatedly until the desired programme duration isshown in the display, e.g. 0:20 for a programme of 20 minutes.If the programme duration is not selected, the duration is automatically set to 10mins.Selecting DELAY START (STARTUITSTEL)See chapter Pro Steam system, section Selecting DELAY START (STARTUITSTEL).Starting the drying programmePress the START PAUSE (START PAZUZE) button. The programme starts.The progress bar and the name of currently performed phase, above it, show stageof the cycle.With wet laundry, after a few minutes the appliance will show the correct pro-gramme duration and foreseen time of cycle end.It is normal for the appliance to make noises during drying programme if garmentswith hard parts, such as metal buttons, are put in the drum.33