Automatic Heat Up1234567891011120 1 2 3 4 5 6 7 8 9 10 11 12 13 14You can get a necessary heat setting in a shorter time if you activate the Automatic HeatUp function. This function sets the highest heat setting for some time (see the illustration),and then decreases to the necessary heat setting.To start the Automatic Heat Up function for a cooking zone:1. Touch ( comes on in the display).2. Immediately touch the necessary heat setting. After 3 seconds comes on in the dis-play.To stop the function change the heat setting.Power functionThe Power function makes more power available to the induction cooking zones. The Powerfunction is activated for 10 minutes at most. After, that the induction cooking zone auto-matically sets back to highest heat setting. To activate, touch , comes on. To deacti-vate, touch a heat setting - .Power function of the double ring cooking zonePower function of the inner ring starts when the appliance senses the pot smaller dimen-sions than the inner ring. Power function of the outer ring starts when the appliance sensesthe pot larger dimensions than the inner ring.Power managementThe power management divides the power be-tween two cooking zones in a pair (see the illus-tration). The power function increases the powerto the maximum level for one cooking zone in thepair. Automatically decreases the power in thesecond cooking zone to a lower level. The displayfor the reduced zone change between two levels.Operating instructions 27