AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000Page 286 01/2011 Description des sous-ensembles4.14.13.3Physical description (see Figure 4.62 )ConnectorsTABLEAU 4.79 DESCRIPTION OF THE LR4 CARD CONNECTORSIndicators : The indicators are located on the card circuit and not on the front panel.(1) x: INDICATOR number, each INDICATOR is assigned to a network lineTABLEAU 4.80 PRESENTATION OF THE LR4 CARD INDICATORSNAME FUNCTION/CHARACTERISTIC CONTACTSJ1 96-pin connector:backplane connection.J4 to J11 Couples of connectors used for fitting theDTOC, FTXA or FTXC daughter cards,one card per analogue lineL0 to L3 RJ45 connectors:each socket provides one connection to ananalogue network line• Pin 4: network line (i)+• Pin 5: network line (i)-• Pins 1, 2, 3, 6, 7, and 8: NCINDICATOR STATE EXPLANATIOND1.x (green) (1) OffOnFlashingStatus of line x (1) :• Line idle• Line used• Pulse dialling rate1
