Supplementary features51eud-0850/2.0 — I7.6 — 08.2007Setting functions by remote controlThis section explains how you can alter your phone’s settings even if you are not directly at yourphone.You are not at your desk and want to set various functions on your phone from a differentphone.You can activate/deactivate many of your phone's functions by remote control from a differentphone.The remote control is initiated using a special */# procedure. You can then enter the functioncommands and */# procedures in the usual way.Using remote control from a third-party phone:Enter */# procedure 36.Enter your phone number.Enter your PIN.Enter the */# procedure for activating/deactivating the function you want.Pick up the handset.fi You hear the acknowledgement tone.Put the handset on-hook.fi The function is now activated/deactivated.Note:The factory setting "0000" is not accepted. First change the PIN as described inchapter "Changing the PIN", page 58 or use */# procedure *47 (see “User’sGuide */# Procedures as of I7.1”). If you have forgotten your PIN, your systemadministrator can reset it to the factory setting.**
