Abus SECVEST FUAA50 Series Installer Manual

Also see for SECVEST FUAA50 Series: Quick guide

Contents

Abus SECVEST FUAA50 Series Installer Manual Manual pdf 293 page image

Appendix293TCP/IP error messagesThe following table shows the TCP/IP error messages:1001 General Error1002 Invalid socket descriptor1003 Invalid parameter1004 It would have blocked1005 Not enough memory in memory pool1006 Connection is closed or aborted1007 Socket is locked in RTX environment1008 Socket, Host Resolver timeout1009 Host Name resolving in progress1010 Host Name not existingOverview of the SSL-relevant messagesThe following table shows SSL-relevant messages that are used in the SSL stack – these may change ina future update:10064 Failed to get an IP address for the given hostname10066 Failed to open a socket10068 The connection to the given server / port failed10070 Binding of the socket failed10072 Could not listen on the socket10074 Could not accept the incoming connection10076 Reading information from the socket failed10078 Sending information through the socket failed10080 Connection was reset by peer10082 Connection requires a read call10084 Connection requires a write call37520 A counter would wrap (eg, too many messages exchanged).37648 Internal error (eg, unexpected failure in lower-level module)37776 Unknown identity received (eg, PSK identity)37904 Public key type mismatch (eg, asked for RSA key exchange and presented EC key)38032 Session ticket has expired.38160 Processing of the NewSessionTicket handshake message failed.38288 Handshake protocol not within min/max boundaries38416 Processing of the compression / decompression failed38544 Hardware acceleration function skipped / left alone data38800 The requested feature is not available38928 Bad input parameters to function39056 Verification of the message MAC failed39184 An invalid SSL record was received39312 The connection indicated an EOF39440 An unknown cipher was received39568 The server has no ciphersuites in common with the client39696 No RNG was provided to the SSL module39824 No client certification received from the client, but required by the authentication mode39952 Our own certificate(s) is/are too large to send in an SSL message40080 The own certificate is not set, but needed by the server40208 The own private key or pre-shared key is not set, but needed40336 No CA Chain is set, but required to operate40464 An unexpected message was received from our peer40592 A fatal alert message was received from our peer40720 Verification of our peer failed