Contents - Declaration of conformity
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Quickstart guide
- Safety information
- Power supply
- Wireless operation
- Device overview
- International key assignment
- Device rear (mounting plate)
- Introduction
- Mounting/Installation
- Fixing the mounting plate to the wall
- Connecting the components
- Installing the micro SD card
- Commissioning
- For a system that is already installed
- Logging out from the wireless alarm system
- Configuration
- Menu control elements
- Login screen
- Main menu
- INFO
- Communication
- PSTN
- Ethernet
- Mobile
- Customisation
- Status
- Components
- Detectors
- Wireless Zones
- Wired Zones
- Wireless control panel
- External Sirens
- Wired Sirens
- Indoor sounder
- Info module/indoor siren
- WUM (Wireless Universal Module)
- Door locks
- RF repeater
- Outputs
- Radio Outputs
- Wired Outputs
- Combination outputs
- Partitions
- Configure partitions
- System
- General
- Installer details
- User access
- User Reset
- Confirmation
- Hardware
- Security settings
- Panel upgrade
- Checking for an upgrade
- Backup/restore
- Report
- Network setup
- IP Mobile Setup
- Email setup
- VoIP dialler setup
- ARC reporting
- ARC Reporting, Phone Book
- ARC Reporting, Account Numbers
- ARC Reporting, Fast Fmt Channels (for "Fast Format" protocol only)
- ARC Reporting, CID/SIA Triggers (for all protocols EXCEPT "Fast Format")
- Encryption
- ARC Reporting, More
- Nursing emergency call
- Social Care, Phone Book
- Social Care, Account Numbers
- Voice dialler
- Speech Dialler, Triggers
- Speech Dialler, Destinations
- Speech Dialler, Test Call
- SMS, Triggers
- SMS, Destinations
- SMS, Destinations, Message X
- SMS, Destinations, Message, Telephone Recipients
- SMS, Messages
- SMS, PSTN SMS
- SMS, test call
- Email
- Email, Triggers
- Email, Destinations
- Email, Messages
- Email, test call
- Communication options
- Contacts
- Test
- Virtual keypad
- Appendix
- Compatible equipment
- Default values/factory defaults
- User menu
- Start Wizard
- Repairs and maintenance
- S/W upgrade
- Software upgrade with new files from the FTP server
- ARC/ESCC reporting
- CID/SIA Events
- Email error messages
- TCP/IP error messages
- VoIP error messages
- Log book entries
- User numbers
- Troubleshooting
- Carry out a GSM/wireless mobile manual test call, prepaid
- Trace, recording communication sequences
- Router, IAD, Firewall
- Time zones
- GSM network notification centre
- Email notification/email setup
- IP Mobile Setup / Mobile Data Communication
- Index
- Linker Kreuthweg
|
Configuration67Info module/indoor sirenName/function ExplanationUpdates EnabledStatus updates on the info module activated – a status change on the alarm systemor zones is displayed "just in time".DeactivatedNo update on the info module and indoor siren – the indoor siren also does not trig-ger any alarm accordingly.Ready-to-Set LED EnabledReady-to-Set LED activated on the info module.DeactivatedReady-to-Set LED deactivated on the info module.Add Panel (alarm panel only)1. After selecting this menu item, the following displayappears: Select Add/Del Siren.2. Select the corresponding siren.3. After selecting this menu item, the following displayappears: Is the receiver is teach-in mode?4. Switch the indoor siren or info module to teach-inmode. Follow the instructions provided in the guidefor the product.5. Activate the sending of wireless information from thealarm panel by pressing Yes.6. The following display appears:Did the receiver beep twice?7. Confirm with Yes.8. The teach-in message and therefore the IP of thealarm panel have been correctly received and suc-cessfully stored in the indoor siren or info module.9. To repeat or cancel, press No.
|
