CHAPTER 1 | IntroductionHardware Description– 20 –Figure 5: Connecting the RG211TO CONNECT THE RG211:1. Power on the RG211 by connecting the AC power adapter and pluggingit into an AC power source.CAUTION: Use ONLY the power adapter supplied with the RG211. Otherwise,the product may be damaged.2. Observe the Indicator LEDs. When you power on the BreezeMAX Si,verify that the Power LED turns on and that the other LED indicatorsstart functioning as described under “LED Indicators” on page 18.3. Connect Category 5 or better Ethernet cables from the RG211’s LANports to the network ports of your PCs. Alternatively, you can connectthe LAN ports to an Ethernet switch or other devices. Make sure thelength of each cable does not exceed 100 meters (328 ft).4. If your PCs are powered on, the RJ-45 LAN port LED on the RG211should turn on to indicate valid links.
