CHAPTER 4 | System SettingsSystem Settings– 31 –LAN S ETTINGS Configuring the CPE with a LAN IP address range enables you to connectvarious network devices to the routing capabilities of the RG211.Figure 12: LAN SettingsThe following items are displayed on this page:◆ IP Address — Specifies an IP address for connection to the CPE. ValidIP addresses consist of four decimal numbers, 0 to 255, separated byperiods. (Default: 192.168.254.251.)◆ Subnet Mask — Indicates the local subnet mask.(Default: 255.255.255.0)◆ DHCP Server — Enables the DHCP server function.◆ IP Pool Starting Address — Specifies the starting IP address of theLAN port/s pool.◆ IP Pool Ending Address — Specifies the ending IP address of the LANport/s pool.◆ Lease Time — Specifies a lease time for usage of the specified DHCPServer settings. (Default: One day; Range: Half hour, One hour, Twohours, Half day, One day, Two days, One week, Two weeks)
