VDSL Commands4-117show controllers efm channel-performanceThis command displays the channel performance for the channels in a VDSL line.For details see “Displaying VDSL Interface Information” on page 3-66.Syntaxshow controllers efm channel-performance {vtu-r | vtu-c} [fast | slow][interface] {15-minutes | 1-day}• vtu-r – VTU (VDSL Transceiver Unit) at the remote end of the line• vtu-r – VTU Transceiver at the near (central) end of the line• fast – Fast channel• slow – Slow channel• interface – Ethernet interface to display• unit/port- unit - This is device 1- port - Port number• 15-minutes – Performance at intervals of 15 minutes• 1-day – Performance at intervals of 1 dayCommand ModePrivileged EXECExampleRelated Commandsshow controllers efm actual (4-111)show controllers efm admin (4-112)show controllers efm status (4-114)show controllers efm line-tableThis command displays the channel performance for the channels in a VDSL line.For details see “Displaying VDSL Interface Information” on page 3-66.Syntaxshow controllers efm line-tableCommand ModePrivileged EXECConsole#show controllers efm channel-performance vtu-c fast 1/1 1-dayVDSL_CHAN_1DAY_INTERVAL_ENTRY :Ethernet 1/1 Channel Interval Number at interval 1 day 0Ethernet 1/1 Channel Interval monitoring at interval 1 day 0Ethernet 1/1 Channel Interval Bad Blocks at interval 1 day 0Console#
