1034. The blade has only non-partitioned/unformatted hard drivesinstalled and no bootable devices attached to it.Once these conditions are met, make sure the PXE server is running.Then turn on the blade on which you wish to boot and/or install theOS. The BIOS in the blade will look at all bootable devices and findingnone will connect to the PXE server to begin the boot/install.Installing via Virtual MediaYou can install the OS via Media Redirection through either the AcerSmart Blade Manager or the Acer Smart Blade Console. With thismethod, the OS is installed from an ISO image that resides on anothersystem/blade.Refer to “Acer Smart Blade Console” on page 28 and “Acer SmartBlade Manager” on page 554 in this manual.
