191Remote Access ConfigurationFigure 3-124. Remote Access ConfigurationRemote Access: This allows you to enable Remote Access support. IfRemote Access is set to Enabled, the following items will be displayed:Serial Port Number: This feature allows the user to decide which serialport to be used for Console Redirection. The options are COM 1 andCOM2.Base Address, IRQ: This item displays the base address and IRQ of theserial port used for Console Redirection.Serial Port Mode: Allows you to set the serial port mode for ConsoleRedirection.Flow Control: Allows you to set the flow control for ConsoleRedirection.Redirection After BIOS POST: Select Disabled to turn off ConsoleRedirection after POST or Always to keep Console Redirection active allthe time after POST. Select Boot Loader to keep Console Redirectionactive during POST and Boot Loader.Note: Some settings may not be supported by someoperating systems.
