205LED IndicatorsBlade module LEDs are described below in the following table.KVM ConnectorAlternatively, you may connect a KVM cable (CBL-0218L, with akeyboard/video/mouse attached) to the KVM connector (#7) of theblade you wish to access. To switch to another blade, disconnect thecable then reconnect it to the new blade.See the Acer Smart Blade Console on page 28 for further details onusing the KVM function remotely.LED State DescriptionPower LED Green Power OnAmber StandbyRed Power Failure 11In the event of a power failure, the N+1 Redundant Power Supply (if includedin your system's configuration) shares the system load to provide uninter-rupted operation. The failed power supply should be replaced with a new oneas soon as possible.KVM/IDLED (Blue)Steady On Indicates that KVM has been initialized on thisblade moduleFlashing Serves as a ID indicator (the ID function is activatedwith a management program)NetworkLED(Green)Flashing Flashes on and off to indicate traffic (Tx and Rxdata) on the LAN connection to this blade module.SystemFault LED(Red)Steady On This LED illuminates red when a fatal error occurs.This may be the result of a memory error, a VGAerror or any other fatal error that prevents theoperating system from booting up.
