Acer Altos R920 Installation & Configuration Manual

Also see for Altos R920 Series: User guide

Contents

Acer Altos R920 Installation & Configuration Manual Manual pdf 19 page image

11 Altos R920Installation Configuration Guide2. Expand Utilities -> Altos R920 -> Integrated SAS hardwareRAID, select RAID Web Console 2 (Windows) and click onSetup.3. Follow the instruction and use the default setting tocomplete the RAID Utility Installation.Network Utility InstallationThe PROSet utility for the onboard Gigabit Ethernetcontroller will be installed automatically when youinstalling the onboard Gigabit Ethernet driver.Windows Server 2008 Enterprise Edition (with IntegratedSAS Hardware RAID)Below information describes how to manually install WindowsServer 2008 Enterprise Edition on Altos R920 with integratedSAS hardware RAID.BIOS RequiredAltos R920 BIOS 23 (or later), BMC 17 (or later) and FRUSDR 14(or later) are required to support Windows Server 2008.Drivers RequiredFor Windows Server 2008 Installation, the following devicedrivers are required.Device Version EasyBUILD VersionOnboard VGA 8.240.50.3000EasyBUILD 8.0 build 200 (orlater)Onboard Chipset 8.6.1.1001 EasyBUILD 8.0 build 200 (orlater)Integrated SAShardware RAID 2.20.0.32 EasyBUILD 8.0 build 200 (orlater)Onboard GigabitEthernet 9.12.17.0 EasyBUILD 8.0 build 200 (orlater)Add-on GigabitEthernet on I/Oexpansionmodule10.2.28.0 EasyBUILD 8.0 build 200 (orlater)TrustedPlatform Module N/A OS built-inIOAT 1.2.79.9 EasyBUILD 8.0 build 200 (orlater)SAS Hot-swapbackplane N/A OS built-in