Acer Altos R920 Installation & Configuration Manual

Also see for Altos R920 Series: User guide

Contents

Acer Altos R920 Installation & Configuration Manual Manual pdf 50 page image

Altos R920 Installation Configuration Guide 42Onboard Chipset N/A OS Built-inIntegrated SAShardware RAID 00.00.03.09 OS Built-inOnboard GigabitEthernet 7.3.15 OS Built-inSAS Hot-swapbackplane N/A OS Built-inConfiguring integrated SAS hardware RAIDPlease refer to the Appendix A. for the integrated SAShardware RAID configuration.Installation Tips1. Please use the built-in driver of VMware ESX Server 3.5to install the OS.2. Boot the system with VMware ESX Server 3.5 CD3. When “boot:” prompted, press Enter to continue.4. Select your Keyboard.5. Select your mouse.6. Accept the VMware license agreement.7. Select a partitioning option.• Recommended – Configures default partitions, based onthe capacity of the hard drive.• Advanced – You specify all partition settings.8. Select how the ESX Server will boot in Advanced Optioins.NOTE: VMware recommends to keep the default setting of“Form a drive (install on the MBR of the drive)” option.9. Configure the ESX Serer host network IP address.NOTE: VMware recommends that you use a static IP addressto simplify client access.10. Follow the instruction to complete the installation ofthe VMware ESX Server 3.5.Downloading the VMware Infrastructure Client1. When the installation is completed, boot the system intoVMware ESX Server 3.5. The below message displayed:To manage this ESX Server, use any browser to open the URLhttp:// address of the ESX Server>/2. Please remotely connect the ESX Server from a console