Acer Altos R920 Installation & Configuration Manual

Also see for Altos R920 Series: User guide

Contents

Acer Altos R920 Installation & Configuration Manual Manual pdf 22 page image

Altos R920 Installation Configuration Guide 14IOAT Driver InstallationThe Base System Device with yellow mark in Device Manger isthe IOAT device. After the Gigabit Ethernet controller driverinstallation completed at previous step, you would see Intel7300 Chipset QuickData Technology Device listed in Systemdevices.VGA Driver Installation1. Windows will treat onboard VGA as Standard VGA device.You can find the ATI ES1000 driver in EasyBUILD. Pleaseinsert the EasyBUILD into the optical drive.2. Expand Drivers -> Altos 920 -> Graphics adapters -> ATIES1000, select Windows Server 2008 x64 and click on Setup.3. Follow the instruction to install the VGA driver andreboot the server after the driver is installed.Gigabit Ethernet Driver Installation (I/O Expansion Module)If the optional I/O Expansion module is installed on AltosR920, there are two additional Gigabit Ethernet available onAltos R920.The driver for the two additional Gigabit Ethernet will beinstalled automatically if you’ve installed the onboardGigabit Ethernet driver at previous step.RAID Utility Installation4. Please insert the EasyBUILD into the optical drive.5. Expand Utilities -> Altos R920 -> Integrated SAS hardwareRAID, select RAID Web Console 2 (Windows) and click onSetup.6. Follow the instruction and use the default setting tocomplete the RAID Utility Installation.Network Utility InstallationThe PROSet utility for the onboard Gigabit Ethernetcontroller will be installed automatically when youinstalling the onboard Gigabit Ethernet driver.Windows Server 2003 Enterprise x64 Edition (withIntegrated SAS Hardware RAID)Below information describes how to manually install WindowsServer 2003 Enterprise x64 Edition on Altos R920 withintegrated SAS hardware RAID.