Acra 1440GWI Operation Manual
                                                                            | |
8LubricationCAUTIONLathe must be serviced at all lubricationpoints and all reservoirs filled to operatinglevel before the lathe is put into service!Failure to comply may cause seriousdamage to the lathe!1. Headstock – Oil must be up to indicatormark in oil sight glass (A, Fig.3). Top off withMobil DTE® Oil Heavy Medium. Fill bypulling plug (D, Fig.3). To drain, remove drainplug (A, Fig.4) with an 8mm hex wrench.Drain oil completely and refill after the firstmonth of operation. Clean out any metalshavings. Then, change oil in the headstockannually.2. Gearbox – Oil must be up to indicator markin oil sight glass (B, Fig.3). Top off with MobilDTE® Oil Heavy Medium. Fill by lifting offthread chart cover (E, Fig.3) and remove plug(C, Fig.3) with an 8mm hex wrench. To drain,remove drain plug (A, Fig.5) with an 8mm hexwrench. Drain oil completely and refill afterthe first month of operation. Then, change oilin the Gearbox annually.Fig.3Fig.4Fig.5 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine