ActronAir ESP Digital SRD131C Installation And Commissioning Manual

Installation and Commissioning Guide Split Ducted ESP DigitalInstallation and Commissioning Guide - Split Ducted ESP Digital UnitsDoc. No.0525-077 Ver. 2 2001291107.02. SRD151CUNIT MODELNUMBERUNITWEIGHT(kg)CORNER WEIGHTS (kg)A B C DSRD151C 155 15.9 57.5 15.9 65.7OVERALL NOMINAL DIMENSION (H X W X L)= 990 X 1320 X 580PLEASE NOTE THAT UNDER ALL CIRCUMSTANCES,CONDENSER AIR MUST NOT RECIRCULATE BACK ONTOCONDENSER COIL. KEEP ALL CLEARANCES FREE OFANY OBSTRUCTIONS57566990O/A110 11557.51320 O/A255 565255580O/ACOMPOUTDOOR COILOUTDOORAIR INLETOUTDOORAIR INLETDRAINPOINTOUTDOORAIR OUTLETOUTDOORAIR INLET92535302525 517(MTG C-C DIST)770865(MTG C-C DIST)270195(MTG C-C DIST)585SIDE VIEWFRONT VIEWTOP VIEW55A BC D600 mmSERVICECLEARANCE(COMPRESSORANDELECTRICALS)400 mmSERVICE / AIRFLOW CLEARANCENIL - TO - MINIMUM SERVICE CLEARANCEOUTDOOR COILCOMP.300 mmSERVICE / AIRFLOWCLEARANCEMINIMUM SERVICE ACCESS AREASAND AIRFLOW CLEARANCESHEIGHT CLEARANCE= 1500 mmNOTES:1. Do not scale drawing. All dimensions are in mm unless specified. Referto corresponding unit dimensional drawing for mounting hole details.2. Service Access Areas and Spaces for Airflow Clearances given above aresuggested minimum based on the condition that the spaces around theunits are free from any obstructions and a walkway passage of 1000mmbetween the units or between the unit and the outside perimeter isavailable.3. Minimum service access areas and spaces for airflow clearances areresponsibilities of the installer, ActronAir will not be held liable for anyextra charges incurred due to lack of access and space for airflow.4. Under all circumstances, condenser air must not recirculate back ontocondenser coil. Keep all clearance free of any obstructions.5. Maximum External Static of Outdoor Fans is 5 Pa.6. STACKING OF UNITS: Ensure that minimum airflow and clearances aremet.7. Refer to Pipe Connection Details on Specifications Sheet.8. MTG C-C DIST = Mounting Centre to Centre Distance.9. Use M12 bolt for feet mounting.THIRD ANGLEPROJECTION