Chapter 9: Monitoring Status and Activity ● 1163 On the menu bar, click File, select Clear the event log, then click Email Notifications.4 Click Yes to clear the log.The log is cleared.Notifying Users by SNMP Trap About Status and ActivityNote: Before attempting the tasks in this section, you should be familiar with SNMP traps conceptsand technology.If you are running Windows or Linux, you can use your operating system to monitor SimpleNetwork Management Protocol (SNMP) traps in your storage space, such as disk drive failuresand logical drive verifications. One system—typically the system where the GUI is installed—can receive SNMP trap notifications.To configure SNMP support on:● Windows, see the next section.● Linux, see page 117.Setting Up SNMP Notifications on WindowsNote: Be sure your Windows installation includes SNMP support. By default, Windows 2000 andWindows XP do not install SNMP.To install and configure SNMP support:1 From your desktop, open the Windows Computer Management tool, then select Servicesfrom the tree.2 Double-click SNMP Service.The SNMP Service Properties window opens.
