Chapter 11: Solving Problems ● 142Understanding Error and Warning MessagesThis section provides detailed information about error and warning events that occur in Adaptec Storage Manager.Warning MessagesError MessagesWarning Warning Message TextArrayCritical Ready disk drives are still availableHotSpareTooSmall The hot spare is too small to protect the specified arrayHotSpareWontWork At least one logical drive is not protected by the specified hot spareInitLD Hot spare is too small for use by at least one arrayNoService The specified logical drive was not initializedSyncLD Could not contact Adaptec Storage Manager Agent. Adaptec Storage Manager may not function correctly.Please start the Agent.Error Error Message TextAbortTask Could not stop the specified currently running taskAccessControl Could not write the logical drive access control listAddToDiskSet Could not add drives to the specified disksetAgentRemoved Could not remove the specified AgentArrayInUse Could not delete the specified array. One or more initiators are logged into a logical drive(s)contained within this arrayArraysInUse Could not delete all of the specified arrays. One or more initiators are logged into a logicaldrive(s) contained within this arrayBreakRemoteMirror Could not break the specified remote mirror facetCalibrateBatteryController Could not recalibrate the specified batteryChangeArraylName Could not change the name of the specified arrayChangeBIOSMode Could not change the BIOS-compatibility mappingChangeDiskSetName Could not change the name of disksetChangeLogicalLun Could not change the LUN of the specified logical drive
