2. Interrupt the autoboot, press the ESC key. The Device Configuration Assistant (DCA) Utility will open.3. Select Apply driver updates.4. Insert the driver disk or other update media, then press Return.5. Complete the Solaris installation, following the instructions included with your operating system.Installing with FreeBSDNote: You will need your FreeBSD Installation CD to complete this task.To install the Adaptec RAID controller driver while installing FreeBSD:1. Insert the FreeBSD Installation CD.2. Insert the USB driver disk.3. Restart your computer. (Be sure to boot from the installation CD!)4. When the FreeBSD start screen opens, select 2 for 'Escape to Loader Prompt'.5. Type: load kernel6. Type this command to locate the USB drive: lsdev7. Assuming the USB drive is disk2s1, type this command:load disk2s1:aacu.ko8. Type this command: boot9. Complete the FreeBSD installation, as usual. When finished, remove the installation CD, but not theUSB driver disk, then reboot.Note: Be sure the system is configured to boot from the controller's bootablearray, not the USB drive!10. To ensure that the driver is loaded automatically as a module at boot time, repeat Steps 4-7, thencomplete the steps below.11. Type this command to boot to the kernel: boot12. Login as root, then type:dmesg13. Assuming the USB drive is da1s1, type this command to mount the drive:mount -t msdosfs /dev/da1s1 /mnt14. Install the driver package:pkg_add /mnt/aac9x-amd64.tgzNote: The distribution also includes driver packages for FreeBSD 8.15. Reboot the computer.Installing with VMware ESX 4.1Note: You will need your VMware Installation CD to complete this task. You musthave root privileges to create and install the driver image.To install the Adaptec RAID controller driver while installing VMware ESX 4.1:1. Insert the VMware Installation CD.2. Restart your computer.3. Follow the on-screen instructions to begin the VMware installation.4. Select Yes to install a custom driver, then click Add.46Proprietary and Confidential to PMC-Sierra, Inc.Document No.: CDP-00277-01-A Rev. A, Issue:Serial Attached SCSI RAID Controllers Installation and User's Guide