Installing on Red Hat, Cent OS, SuSE, or Fedora LinuxTo install the driver on Red Hat Linux, Cent OS, SuSE Linux, or Fedora Linux:1. Insert and mount the Adaptec Installation DVD:DescriptionOptionsmount /dev/cdrom /mnt/cdromRed Hat, Cent OS:mount /dev/cdrom /media/cdromSuSE:mount /dev/hdc /mnt/cdromFedora:2. Install the module RPM:rpm -ivh mount-point/xxx/yyy.rpmwhere mount-point is the mount point on the Linux system, xxx is the driver path, and yyy.rpm isthe rpm file.3. Reboot your computer to ensure the driver loaded correctly.4. Continue with Managing Your Storage Space on page 54.Installing on Debian LinuxNote: You must have root privileges to install the driver image. For Debian Linux, thesu command is sufficient.To install the driver on Debian Linux:1. Insert and mount the Debian Installation DVD:mount /dev/cdrom /mnt/cdrom2. Load the Debian unpacking tools:apt-get install build-essential3. Install the DEB driver package (where xxxxx is the build number):dpkg -i aacraid-1.2.1-xxxxx-Debian6.0-all.deb4. Reboot your computer to ensure the driver loaded correctly.5. Continue with Managing Your Storage Space on page 54.Installing on Ubuntu LinuxNote: For driver installation on Ubuntu Linux, you may need to create the root accountand password. Enter these commands: sudo bash; sudo passwd root. Youmust have root privileges to install the driver image.To install the driver on Ubuntu Linux:1. Update the Ubuntu package index:sudo apt-get update2. Load the Ubuntu unpacking tools:sudo apt-get install build-essential3. Install the DEB driver package (where xxxxx is the build number):Ubuntu 10.x:51Proprietary and Confidential to PMC-Sierra, Inc.Document No.: CDP-00277-01-A Rev. A, Issue:Serial Attached SCSI RAID Controllers Installation and User's Guide