4-10Adaptec Storage Manager Pro for DuraStor User’s GuideFrom the Storage Manager Pro Dashboard on any system in the setdo one of the following: From the Normal view, look for the icon that looks like threesystems. That is the directory manager. (See page 1-13.) From the Detail view, look for a check mark in the DirectoryManager column.Moving a System from One Management Set toAnotherYou can move a system from one management set to another. Youmust do this from the system that you want to move.To move a system from one management set to another:1 From the Storage Manager Pro Dashboard on the system youwant to move, click Remote Configuration.The Remote Configuration dialog box appears.2 From the Configuration Task list, select Register with AnotherDirectory Manager.3 Type the system name or IP address of the directory manageryou want to register with.4 Click OK.Storage Manager Pro unregisters the system from the olddirectory manager and registers it with the new one.If the old directory manager is not available, Storage ManagerPro displays a message letting you know that it could notunregister you from the old management set. You should checkthat the old directory manager is turned on, has the StorageManager Pro service (ASMProServer) running (see StartingAdaptec Storage Manager Pro on page 1-3), and that it is accessibleon your network. Then try the above steps again.5 Type the login name and password for an account that hasAdministration privileges and resides on the new DirectoryManager, and click Login.
