Adcom GFR-700HD User Manual

Also see for GFR-700HD: Brochure Specification sheet Quick start guide

Contents

Adcom GFR-700HD User Manual Manual pdf 38 page image

38Chapter 3 - SetupGFR-700HD Owner’s ManualDelay ConfigurationHow far is each speaker from your primary listeningarea? The GFR-700HD uses this information to cal-culate differences in distance and adds millisecondsof delay if necessary to ensure that all audio signalsreach your ears simultaneously from all speakers.The following is an overview of the Delay Configura-tion menu.To access the Delay Configuration menu:1 Press the Main button on the remote control.2 Press the Setup button.3 Use the / buttons to select DELAY CONFIG,then press the Select button.4 Use the / buttons to choose from the follow-ing menu items:FRONTSets the distance from your front speakers to yourprimary listening area in feet or meters (see DelayUnit below). Measure this distance, then use the/ buttons to select:• 0-20 feet (0-6.1 meters)• The front distance is the benchmark setting forall other speakers, so measure this distance care-fully.CENTERSets the distance from your center speaker to yourprimary listening area in feet or meters (see DelayUnit below). Measure this distance, then use the/ buttons to select:• 0-20 feet (0-6.1 meters)• The center speaker is often closer to the primarylistening area than the front speakers. If so, theGFR-700HD calculates the difference in distanceand adds delay accordingly.SURROUNDSets the distance from your surround speakers toyour primary listening area in feet or meters (seeDelay Unit below). Measure this distance, then usethe / buttons to select:• 0-20 feet (0-6.1 meters)• The surround speakers are often closer to theprimary listening area than the front speakers.If so, the GFR-700HD calculates the difference indistance and adds delay accordingly.SURR BACKSets the distance from your surround speakers toyour primary listening area in feet or meters (seeDelay Unit below). Measure this distance, then usethe / buttons to select:• 0-20 feet (0-6.1 meters)• The surround back speakers are often closer tothe primary listening area than the front speak-ers. If so, the GFR-700HD calculates the differ-ence in distance and adds delay accordingly.SUBWOOFERSets the distance from your subwoofer to your pri-mary listening area in feet or meters (see Delay Unitbelow). Measure this distance, then use the /buttons to select:• 0-20 feet (0-6.1 meters)• The subwoofer is often closer to the primary lis-tening area than the front speakers. If so, theGFR-700HD calculates the difference in distanceand adds delay accordingly.DELAY UNITSets the unit of measurement for channel delays.Use the / buttons to select:• Feet or Meters.