Advantek Networks AWR-11N-RT User Manual

Also see for AWR-11N-RT: User guide

Advantek Networks AWR-11N-RT User Manual Manual pdf 32 page image

32[DHCP Server Setting]DHCP Server: To enable/disable DHCP server’s dynamic IP address assignment. Default:Enable.Assigned DHCP IP Address: Specify the starting/ending IP address of the IP address pool.Default Start IP: 192.168.1.100.Default End IP: 192.168.1.250.DNS IP Lease Time: Specify the time duration for which the settings will be in effect. Default:86400 seconds.[DHCP Static MAP]MAC: Enter the MAC address of each DHCP client.IP: Assign an IP address for each DHCP client. The IP address should comply with the DHCPaddress pool you specified. The DHCP address pool contains the range of the IP address thatwill automatically be assigned to the clients on the network.Description: Enter a short description for this DHCP client.Action: Insert a new DHCP Static entry or update a specified entry.[DHCP Client List]DHCP client computers connected to the device will have their information displayed in theDHCP Client List table. The table will show the Type, Host Name, IP Address, MAC Address,Description, and Expired Time of the DHCP lease for each client computer.3.2.4 Static RouteStatic routes are special routes that the network administrator manually enters intothe router configuration. The route table allows the user to configure and define all the staticroutes supported by the router. Click Static Route on Network Settings, below screen willprompt for Static Route setting.All manuals and user guides at all-guides.com