Avision ScanQ FF-1302S User Manual

3.2 Power on the scannerPress the Power button to power on the scanner. After powering on, the blue LED lightflashes first and then the Power button displays as solid green. The solid green also indicatesthe default resolution to be 300 dpi. To change the resolution, press the Power buttonrepeatedly until your desired resolution is shown with the corresponding LED light.= 300 DPI (default when scanner is powered on)= 600 DPI= 1200 DPI.3.3 Insert your documentImportant! Insert only one page at a time, and insert the next one only when the previous one isdone. Otherwise, the scanner may malfunction. The paper detector is quite sensitive. Please do not push your document into thefeeding slot or the top of your image will be cut. Simply let go the photo (card) when itbegins to feed into the slot.1. Insert your document FACE UP to the feeder and align it to the left edge of the feeder.Then, slide the guide lever against the right side of the original.Guide Lever2. Gently push the original into the feed slot, release it as soon as it begins to feed. Afterthe feed begins, the scanner pauses briefly and then continues the feed.3. Wait until the indicator light stops blinking before inserting and scanning the nextoriginal.4. By default, all images are stored in JPEG file format. When the scan is completed, thescanner will automatically create a folder with its subfolder titled “DCIM\100PHOTO”on your memory card or flash card, which will hold the first 9999 scans. Then“DCIM\101PHOTO” folder will be created for the next 9999 scans, and so on.3-2