Avision ScanQ FF-1302S User Manual
                                 | |
Contents
|
Q： Why do all the images I scanned have the same date whensaved on the memory card? Is it possible to show real timefor these images?A： Yes. Please follow these steps to set a real-time clock for thedevice:1. Open your browser and type Avision’s web site(http://www.avision.com) at the URL address. On the Productor Support page, select this mobile scanner and thendownload a time.txt file for the device.2. Make sure your scanner is inserted with a microSD card and abattery full of power.3. Turn on your scanner and connect it to your computer with aUSB cable. Your computer should recognize the scanner as aRemovable Disk.4. Copy and paste the time.txt file to the root directory of theRemovable Disk Drive.5. Open the text file. The text file contains a string inYYYY/MM/DD/HH/MM format which indicatesyear/month/date/hour/minute, for example,2013/06/15/07/30.6. Change the date and time to correct values and then save thefile.7. Turn off the scanner and then turn it on. Now your havecompleted setting the real-time clock for the device.Scan a document and save the image to the memory card.Connect the scanner to your computer, you will find thescanned images are displayed with correct date and time.Note:z Charge your battery when its power is running low.z If the battery has been replaced or the battery has no powerat all, you will need to recharge the battery and repeat theabove steps to set a real-time clock again.5-4 |
Related manuals for Avision ScanQ FF-1302S
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine