Avision ScanQ FF-1302S User Manual

User’s Manual3.6 Power off the scannerWhen your scanning is finished, press the Power button for 3 seconds to turn scanner OFF.The blue LED flashes twice and then the Power LED light goes off. When the scanner is left idle for 3 minutes, the default Power Save mode automaticallypowers off the scanner.3.7 Access the scanned imagesConnect the scanner to your computer to access the scanned images from the scanner’sbuilt-in disk or from the inserted memory card without using an independent card reader.While connected, you can view your scanned image files, copy and paste files from onestorage area to the other, or delete files you don’t wish to keep.3.7.1 Computer system requirementsOperating System: Windows – XP, Vista, Windows 7, Windows 8Macintosh – Mac OS 10.5, 10.6, or laterUSB Port: USB 2.03.7.2 Connect with Windows XP or Later1. Turn on the scanner.2. Insert the memory card containing your scanned images into the scanner’s memorycard slot. Skip this step if images are stored on the built-in disk.3. Connect the included USB cable to the scanner and to your computer.4. Your computer should recognize the card or the scanner as a Removable Disk.3-5