Avision ScanQ FF-1302S User Manual

User’s Manual(Each scanned image is given a file name with the prefix IMG followed by a 4- digitsequential number in the order the images are stored. For example, IMG_0001.jpg,IMG_0002.jpg, etc.)Note:• Do not remove the memory card while the indicators are blinking.• If the memory card is near full (lower than 1MB), the indicator light blinks. Useanother card or delete some files on it if necessary.• Remove the things remained on the photo, such as staples, paper clips, andpaper sticky notes before feeding it into the scanner due to possible damage tothe scanner.3.4 Change your file formatThe scanner offers two types of file formats. By default, all images are stored in JPEG format.Optionally, you can switch to PDF file format. To save your document in PDF file format,follow these steps:1. Press to turn on the scanner.2. Press again for three times. The blue LED light will be lit. This indicates the imageswill be stored in PDF file format. Press again to change your resolution.=PDF file format+ 300 dpi=PDF file format + 600 dpi=PDF file format + 1200 dpi3-3