10AXIS 209MFD/MFD-R/MFD-R M12Note: The snapshot function in MPEG-4 full screen mode will return the image view to the default live viewpage. Click the View Full Screen button to return to Full Screen Mode.Pan/Tilt/Zoom controlsThe AXIS 209MFD can be controlled by clicking in the image, or by clicking on thePan/Tilt/Zoom bars on the Live View page. These are enabled/disabled for specified users bythe administrator under System Options > Security > Users > User List.Zoom out to overview image will set the camera to the minimum zoom position. Note thatwhen in this position, the camera cannot pan or tilt.Note: Digital PTZ is not enabled by default. To use digital PTZ and access these controls as well as the Control panel, see PTZ Configu-ration, on page 22.The control panelClick the Ctrl panel button to display the control panel. The panel provides buttonsfor switching between Pan, Tilt and Zoom Functions when in Center mode. Thiscontrols whether the camera should pan/tilt to the position in the image that wasclicked, or whether it should zoom directly in on that point.The control panel can also show your own shortcut buttons, which are configuredfrom Setup > PTZ Configuration > Advanced.Note: The scroll wheel on the mouse can also be used to control the zoom.Click the View Full Screen button to make the video image fill the entire screen area.Press Esc (Escape) on the computer keyboard to exit full screen.Click the Record button to start an MPEG-4 recording (only available when viewingMPEG-4).These buttons change the navigation mode. Selecting Center will move the camera viewto center on the position that was clicked. Joystick mode will move the camera in thedirection indicated by a mouse click, relative to the center of the image. The farther youclick on the image from the center, the greater the movement. These modes can also beselected by right-clicking in the image.