Axis 209MFD User Manual

Also see for AXIS 209MFD: Specifications Product guide Installation guide Datasheet

Axis 209MFD User Manual Manual pdf 29 page image

29AXIS 209MFD/MFD-R/MFD-R M12A signed certificate can be obtained from an issuing Certificate Authority by clicking the Create CertificateRequest button. When the signed certificate is returned, click the Install signed certificate button to importthe certificate. The properties of any certificate request currently resident in the camera or installed can alsobe viewed by clicking the Properties... button. The HTTPS Connection Policy must also be set in thedrop-down lists to enable HTTPS in the camera. For more information, please refer to the online help.Date & TimeCurrent Server Time - displays the current date and time (24h clock). The time can be displayed in 12hclock format in the Overlay (see below).New Server Time - Select your time zone from the drop-down list. If you want the server clock toautomatically adjust for daylight savings time, select the Automatically adjust for daylight saving timechanges.From the Time Mode section, select the preferred method to use for setting the time:• Synchronize with computer time - sets the time from the clock on your computer.• Synchronize with NTP Server - the camera will obtain the time from an NTP server every 60minutes.• Set manually - this option allows you to manually set the time and date.Note: If using a host name for the NTP server, a DNS server must be configured under TCP/IP settings.See Network - Basic TCP/IP Settings below.Date & Time Format Used in Images - specify the formats for the date and time (12h or 24h) displayed inthe video streams.Use the predefined formats or use your own custom date and time formats. See Advanced File Naming &Date/Time Formats in the online help for information on how to create your own file formats.Network - Basic TCP/IP SettingsIP Address ConfigurationThe AXIS 209MFD/MFD-R/MFD-R M12 supports both IP version 4 and IP version 6. Both versions may beenabled simultaneously, and at least one version must always be enabled.When using IPv4, the IP address for the camera can be set automatically via DHCP, or a static IP addresscan be set manually.If IPv6 is enabled, the AXIS 209MFD/MFD-R/MFD-R M12 will receive an IP address according to theconfiguration in the network router.There are also options for setting up notification of changes in the IP address, and for using the AXISInternet Dynamic DNS Service. For more information on setting the IP address, please see the online help.Notes: • DHCP is a protocol for automatic IP address assignment on a network. IP address assignment via DHCP may lead to the situationwhere the IP address changes and you lose contact with the camera. Configure the options for notification of IP address change(under Services) to receive notification from the camera when the IP address changes.• Alternatively, if your DHCP server can update a DNS server, you can access the AXIS 209MFD/MFD-R/MFD-R M12 by host namewhich is always the same, regardless of the IP address.ServicesEnable ARP/Ping setting of IP address - The IP address can be set using the ARP/Ping method, whichassociates the unit's MAC address with an IP address. Check this box to enable the service. Leave disabled toprevent unintentional resetting of the IP address.Notes: • The ARP/Ping service is automatically disabled 2 minutes after the unit is started, or as soon as an IP address is set.• Pinging the unit will still be possible when this service is disabled.Options for notification of IP address change - If the IP address for the camera changes, e.g. automaticallyby DHCP, you can choose to be notified of the change. Click Settings... and enter the required information.